pcs
Item description
Suitable:
Rotary joint for simple supply line or drainage. These rotary joints are suitable for use of non-contaminated water. Alternatively, the units can be equipped with a special seal for non-contaminated or poorly filtered water.

Materials:
Body: brass, seal: carbon graphite / carbide

Temperature range:
0 to +95 °C

Operating pressure:
max. 50 bar (G 2": max 40 bar)

Media:
Water

Optional:
Version in stainless steel -ES, seal package for abrasive media or unclean water -AB

Warning:
Maximum pressure and speed values may not occur simultaneously. If in doubt, please ask us for confirmation. A liquid pressure that exceeds 8 bar is only allowed when using with cooling water and a maximum temperature of +50°C. Not suitable for reverse operation

Advantages:
•The springs are external to the media flow in order to minimise the loss of pressure and avoid turbulence.

Warning:
Take note of left and right-handed threads: Left-handed thread for feeding into clockwise rotating drums. Right-handed thread for feeding into counter-clockwise rotating drums.
Properties
Ver­sion Abra­sive media
Thread G G 1-1/2" LH
Thread G1 G 1-1/2"
L [mm] 132
E [mm] 208
D [mm] 36
F [mm] 93
Umax. [1/min] 2500
Op­er­at­ing pres­sure [bar] max. 50
Further information on DGHL112-AB
Customs duty number 84836020
RoHS compliant Yes
Documents

 
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Not in stock