{{ $t('shop.all.spaetbestellservice.hinweis') }}
Dimensions W x L x H | 18.9 mm x 76.6 mm x 124.3 mm |
Pitch dimension [mm] | 18,9 |
Diagnosis via LED |
Error per module, Status per channel |
Diagnosis via bus | Short circuit / overload circuit sensor supply |
Module parameter |
Diagnosis short circuit sensor supply, Input debouncing time, Signal extension time, Behaviour after short circuit/overload |
Channel parameter | Signal extension |
Fuse (short circuit) | Internal electronic fuse Per module |
Potential separation channel - internal bus | no |
Potential separation channel - channel | no |
Permission | RCM mark |
CE certificate (see declaration of conformity) | to EU EMC directive |
Oscillation strength | Transport use test with severity level 1 to FN 942017-4 and EN 60068-2-6 |
Shock resistance | Shock test with degree of severity 1 to FN 942017-5 and EN 60068-2-27 |
Corrosion resistant class KBK | 0 - No corrosion stressing |
Bearing temperature [°C] | -20 to 70 |
Relative humidity |
95 %, Not condensing |
Protection category | IP20 |
ambient temperature [°C] | -5 to 50 |
Information about ambient temperature | -5 - 60 °C with vertical installation |
Product weight [g] | 102 |
Fastening type | With Slot rail |
Material information |
LABS containing materials included, RoHs compliant |
Housing material | PA |
Quantity inputs | 16 |
Input debouncing time |
0.1 ms, 3 ms, 10 ms, 20 ms |
Intrinsic power input operating voltage electronics/sensors | Type 15 mA |
Max. cumulative current inputs per module [A] | 1,8 |
Nominal operating voltage DC electronics / sensor [V] | 24 |
Switch level |
Signal 0: <= 5 V, Signal 1: >= 11 V |
Permitted voltage oscillations electronics/sensors | ± 25 % |
Max. address volume inputs [Byte] | 2 |
Characteristic curves inputs | to IEC 61131-2 type 3 |
Switching logic inputs |
PNP (positive switching), 2-wire sensors acc. to IEC 61131-2, 3-wire sensors acc. to IEC 61131-2 |
Electrical connection: input, function | Digital input |
Electrical connection: input, connection type | 8x multi tube holder |
Electrical connection: input, connection technology | Spring tension clamp |
Electrical connection: input, number of pins / wires | 6 |
Electrical connection: inlet, conductor cross-section [mm²] | 0.2 to 1.5 |
Electrical connection: inlet, information on conductor cross-section | 0.2 - 2.5 mm² for flexible conductor without wire end sleeve |
{{ $t('shop.all.gewicht') }} | 102 g / pcs |
{{ $t('shop.display.artikel.zollwarennummer') }} | 85389099 |
{{ $t('shop.all.hersteller') }} | Festo |
{{ $t('shop.all.spaetbestellservice.hinweis') }}
{{ $t('shop.all.wochenendversand.hinweis') }}
An error has occurred, please reload this page and try again.