pcs
Item description
Materials:
shock absorber body and accessory: Steel bronzing, piston rod: hardened, rust-free steel

Temperature range:
0 to +66 °C

Stroke speed:
0,15 to 4,5 m/s

Fixed limit stop:
integrated

Information:
Exceeding W4 (max. energy consumed per hour expressed in Nm/h) is possible in the case of temporary switch-off, or when the shock absorber is cooled with the cylinder exhaust air (take note of the approved heating).
Properties
Thread B M 25x1,5
Stroke [mm] 40
max. En­ergy con­sump­tion per stroke (W3) [Nm] 100
max. En­ergy con­sump­tion per hour (W4) [Nm] 90000
ef­fec­tive mass (me) ad­justable [KGM] 14 - 2040
Spring force [N] 10 - 35
A [mm] 17,0
D [mm] 137,8
E [mm] 10
G [mm] 6,3
I [mm] 50,9
J [mm] 4,6
K [mm] 23,0
SW1 [mm] 23
SW2 [mm] 30
Max. axial de­vi­a­tion* [°] 1
clamp­ing flange MB 25
Stop sleeve AH 25
Lock­ing nut KM 25
Further information on MA900EUM
Weight 410 g / pcs
Customs duty number 84879059
RoHS compliant Yes
Manufacturer ACE
Documents
*at higher axial deviations use side load adapters (Type BV)
***The side load adapter can only be fitted on shock absorbers without an impact head, or if required, it must be dismantled.

 
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Immediately available