pcs
Item description
Materials:
shock absorber body and accessory: Steel bronzing, piston rod: hardened, rust-free steel

Temperature range:
0 to +66 °C

Stroke speed:
0,15 to 4,5 m/s

Fixed limit stop:
integrated

Information:
Exceeding W4 (max. energy consumed per hour expressed in Nm/h) is possible in the case of temporary switch-off, or when the shock absorber is cooled with the cylinder exhaust air (take note of the approved heating).
Properties
Thread B M 20x1,5
Stroke [mm] 19
max. En­ergy con­sump­tion per stroke (W3) [Nm] 25
max. En­ergy con­sump­tion per hour (W4) [Nm] 45000
ef­fec­tive mass (me) ad­justable [KGM] 2,3 - 226
Spring force [N] 5 - 10
A [mm] 13,5
D [mm] 88,6
E [mm] 8
G [mm] 4,8
I [mm] 30,0
J [mm] 4,6
K [mm] 17,0
SW1 [mm] 18
SW2 [mm] 23
Max. axial de­vi­a­tion* [°] 2
clamp­ing flange MB 20
Stop sleeve AH 20
Side load adapter** BV 20 SC
Lock­ing nut KM 20
Further information on MA225EUM
Weight 170 g / pcs
Customs duty number 84879059
RoHS compliant Yes
Manufacturer ACE
Documents
*at higher axial deviations use side load adapters (Type BV)
***The side load adapter can only be fitted on shock absorbers without an impact head, or if required, it must be dismantled.

 
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Immediately available